A 10 kW system suits large villas, bungalows and properties with heavy or multi-family load in Jodhpur — typically homes running four or more air conditioners, multiple water pumps, and sometimes a second sanctioned connection. It also suits homeowners planning ahead for an electric vehicle.
The consumption band that usually matches a 10 kW array is 1,000 to 1,400 units per month averaged across the year. Because Jodhpur load is heavily seasonal, check a summer bill and a winter bill rather than one month in isolation — sizing off a mild month is the most common way people end up with a system that disappoints them in May.
A 10 kW array typically needs 800 to 1,000 sq ft of shade-free roof using standard mono PERC modules. Bifacial or higher-wattage modules can reduce that; a tilted or elevated structure can recover area on an awkward roof.
Remember that this is usable area. Water tanks, the stairwell mumty and its winter shadow, parapets and walking space between rows all come off the number you measured with a tape.
In the Jodhpur region a well-oriented, unshaded, clean array of this size would typically be expected to produce in the range of 1,100 to 1,400 units per month averaged across the year, with summer months above that range and winter months below it.
| Modules | Eighteen to twenty-four modules, often bifacial at this size, ALMM-listed |
|---|---|
| Inverter | 10 kW grid-tied inverter, or hybrid-ready if battery backup is planned later |
| Mounting structure | Hot-dip galvanised steel, specified to the site wind-load class |
| Protection | DC and AC isolators, surge protection device, dedicated earthing pits |
| Metering | Bidirectional net meter supplied and installed by JdVVNL |
| Monitoring | Generation monitoring through the inverter manufacturer's app |
| After handover | Scheduled cleaning and electrical checks during the AMC period |
| Indicative system cost | [VERIFY: your current 10 kW price range] |
|---|---|
| PM Surya Ghar central subsidy | Up to ₹78,000 for systems of 3 kW and above |
| Indicative net cost after subsidy | Gross cost less up to ₹78,000 central subsidy |
The subsidy is credited by the government directly to your bank account after installation and DISCOM inspection. It is not a discount applied to the invoice, so you should plan for the full amount up front and treat the subsidy as a reimbursement. Details on the solar subsidy in Jodhpur page.
Three practical points at this size. First, sanctioned load: your net-metered capacity is subject to JdVVNL rules relative to your sanctioned load, and an enhancement application may be needed before approval. Second, surge and lightning protection: larger arrays present a bigger exposure, and proper SPD plus dedicated earthing stops being optional. Third, the subsidy proportion: the central cap of ₹78,000 does not scale with size, so it covers a much smaller share of a 10 kW project than a 3 kW one. Plan the budget on the gross figure.
It will not run your home during a JdVVNL outage — a standard on-grid inverter disconnects when grid supply fails, as a safety requirement. It will not take your bill to zero, because fixed charges and meter rent continue regardless. And it will not hit the generation range above if the array is shaded or left dirty, which is why cleaning is part of the AMC rather than an afterthought.